Contents Tour Biographies Celebs Links
Buff spacer

The Electro-Voice Models 652, 652A
dynamic omni, semi-directional microphones

electro-Voice 652

Hear the sound of this mic as voiced by Robert Murray.

electro-Voice 652

electro-Voice 652

electro-Voice 652

electro-Voice 652

electro-Voice 652

electro-Voice 652

electro-Voice 652

electro-Voice 652

The need for an inconspicuous dynamic microphone is effectively filled by the Electro-Voice Model 652. A length of semi-rigid tubing brings the microphone conveniently close to the user, allowing full-range, pop-free response without obstructing the view of either user or audience. Particularly recommended for television and radio broadcast applications, for recording lectures, and for use in panel shows or group discussions. Excellent for hand-held use.

electro-Voice 652

electro-Voice 652

A feature of the Model 652 is its provision for two degrees of upper-range emphasis through the addition of a clear plastic baffle. Added presence may be achieved by the use of either of two clear plastic baffles which are provided with the microphone. The large baffle provides an 8-dB boost in the brilliance range at 5,000 cps, while the small baffle boosts this range by 5 dB. Used without a baffle, the microphone provides smooth response from 100 to 7,000 cps. These baffles also add directivity as shown in Figure 5 and Figure 6.

electro-Voice 652

Specifications

electro-Voice 652

The Model 652 is mounted on a 316'' steel tube and finished in non-reflecting Nicaloy. Output level is −60 dB. Designed to match all low-impedance inputs. A 20-foot three-conductor shiended cable and Model 300 stand coupler are included. The overall length of the Model 652 is 24''. The Model 652A is identical to the Model 652 in all respects, except that the length is only 15''.

electro-Voice 652

Voice sample and photographs are courtesy of Robert Murray.

Text and illustrations are courtesy of Electro-Voice.

Cover
Download the Specifications for these mics.
 

 

Next Page button